Grain Bin Fall Protection System - Corrugated Bin C 40'

Bin Safe – Corrugated Wall Bin Kit with 40’ Wire Rope

* Requires a Bin Safe User Kit. One Bin Safe User Kit will service all bins

FEATURES

Product Summary

Protect your family from one of the most common accident locations on the farm. This patented and award-winning grain bin fall protection system is a cutting-edge engineered product. Bin Safe is designed to prevent a farmer from impacting the ground when falling off the roof or the grain bin ladder

The Corrugated Wall Bin Kit is designed for corrugated wall grain bins that have the roof structure shown in the pictures below. Bin Safe has been installed on bins branded by companies such as Meridian, Westeel, Foremost, Westor, Viterra, Twister, Sioux, Butler, Behlen, Sukup, Superior, Sakundiak, Goebel, GSI, Darmani, Brock,  and other corrugated wall bins.

Smooth Wall Grain Bin Kits also available (see related products).

Note: Purchase the Corrugated Blind Bolt Kit for bins that have a permanent lid that cannot be opened or have some other structure that is blocking access to the bin opening. 

Top 5 Reasons to Put a Northern Strands Bin Safe System on Your Grain Bin

5. Allows for safe bin climbing
6. OH&S, CSA, OSHA, & ANSI Compliant
7. OH&S Regulations state that a fall protection system must be in place when working at heights above 10 ft.
8. An injury or death due to a lack of required fall protection can bring financial ruin to a farm
9. The NUMBER ONE reason . . . to protect your family and employees. Be safe, not sorry.

Testimonial:

“When I did fall (off a grain bin), I broke my pelvis in four places, and I laid in the hospital for six weeks before I could even put pressure on my legs. The Bin Safe System allows us to go all the way back down to safety. That is what every farmer requires or should have to be as safe as possible when climbing bins.”

- Greg Setter

Official Video

Official Bin Safe Video

Specifications

• Bin Kit includes all hardware for a single corrugated wall grain bin
• Very easy to install and use. Install time is approx. 30 mins
• 40’ wire rope included. Other SKU’s are available with 60’ or 80' wire rope. Excess rope is cut off.
  • Length of rope needed is calculated as follows in feet: Distance from the bins bottom ladder rung(where rope is clipped), to the top of the eave + half the diameter of the bin + 5’(for slack and to clip rope).
  • Example: Bin side wall height 25’ + half diameter of bin 7.5’ + 5’ = 37.5’. A 40’ Bin Kit is needed for this bin.
• Requires a Bin Safe User Kit (sold separately). One Bin Safe User Kit will service all bins that have either a Bin Safe Smooth Wall or a Bin Safe Corrugated Wall Kit installed. User Kit includes 3’ Shock Absorbing Lanyard, Fall Protection Harness, and the Wire Rope Traveler
• Tools required for install includes sockets, ratchets, wrenches, needle nose pliers, cable cutters, vice grips, tape, utility knife, hammer, drill, 9/16 drill bit and black marker.

Award Winning System

Manufactured By:

Contact Information

If you have any questions or would like to place an order with our Bin Safe Sales Representative, please contact:

• Martin Toews
• Email: farmsafety@northernstrands.com
• Phone: 306-441-6845